DENVER METRO & COLORADO FRONT RANGE
Electrical ratings | Buyer only

Sell 600-volt Busway in Denver

We buy used, surplus and decommissioned electrical equipment. Cash offers, payment upfront and no seller testing. We handle rigging and logistics, including disconnects and freight.

WE BUY. WE DON'T SELL.

Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought
FULL-SERVICE DECOMMISSIONING

We buy switchgear from decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

THE VALUE IS STILL THERE — 01

Your switchgear
has value.

When equipment is surplus to your operation, finding the right buyer shouldn't add another project to your list. We buy used and decommissioned electrical distribution equipment across the Denver area, including switchgear from data centers and power plants.

Tell us what you have. We'll review the details, make a cash offer and handle all rigging and logistics: crane, rigging, disconnects, loading, freight and hauling are on us. There is no testing required from the seller.

LET'S TALK ABOUT YOUR EQUIPMENT
Real surplus electrical distribution equipment
GOOD EQUIPMENT. NEW OPPORTUNITY.DENVER, CO ↗

WHAT WE BUY — 02

Built to move
big equipment.

From a single surplus component to an entire facility changeout, send us the details. We buy equipment in all voltage classes.

06

Decommissioning projects

Electrical equipment from facilities, plants and infrastructure changeouts.

Tell us what you have

DECOMMISSIONING & CHANGEOUTS

Big projects.
One less burden.

From facility shutdowns to major electrical changeouts, we buy surplus gear and handle the work of moving it.

01 / DATA CENTERS

Data center decommissioning

We buy electrical switchgear out of decommissioned data centers. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

02 / POWER PLANTS

Power plant teardowns

We buy electrical switchgear out of shut-down power plants and handle all rigging and logistics, from disconnects and crane work to loading, freight and hauling.

Electrical disconnects and rigging are handled by qualified personnel.

A BETTER WAY TO SELL — 03

Simple from the start.

No testing on your end. No rigging or freight coordination headache. Just a straightforward conversation about your equipment.

01

Show us what you have.

Send nameplate photos, basic ratings and your location using the form, text, email or phone.

02

Get a cash offer.

We'll review your equipment and the available information to determine an offer.

03

Get paid upfront.

Once the details are agreed, payment is made upfront. Crane, rigging, disconnects, loading, freight and hauling are on us.

EQUIPMENT BUYING GUIDE — 04

Understanding the busway being offered

Busway is an enclosed conductor system used to distribute power along a route. A surplus lot may include straight lengths, elbows, fittings, tap-off units or other associated pieces, and the pieces should be identified as the actual inventory rather than assumed to be a complete reusable run. Describe the visible assortment and whether it is still installed or has already been removed by qualified professionals. The 600 volt description is a voltage figure, not a complete identification of the assembly. Give the exact nameplate wording when available and note whether the label identifies a complete unit or an individual device. Other relevant details may include current rating, phase and frequency as shown; do not infer unmarked specifications from the voltage alone.

What matters for owners of 600-volt equipment

Busway value depends on the specific system, condition and configuration, not merely on total length. Different series and fittings may not be interchangeable, and a short mixed collection is different from a documented group of matching sections. Explain the way material is stored and whether long or awkward pieces will affect collection; the buyer can review the actual lot before making an offer. Equipment with a similar voltage label can vary in configuration, included devices and condition. Record the manufacturer and model and identify the pieces that are part of the sale. Do not open an enclosure or operate equipment to verify its rating; existing documents and a safe exterior nameplate photograph are enough to begin the discussion. For an inquiry in Denver metro, identify the property's authorized contact, the equipment's actual location and any known access limits. An owner, facility representative and contractor can have different responsibilities; clarifying those roles makes the inventory and handoff easier to coordinate.

Identify the equipment without extra testing

For owners of 600-volt equipment, document the actual configuration of 600-volt busway rather than relying on a site-wide description. For each identifiable series or rating, photograph exterior labels and give an approximate count and length of the accessible sections. Note the manufacturer, voltage and amperage when visible, as well as included fittings or tap-off units. Mark a measurement as an estimate if it is not confirmed. Do not open the enclosure, touch exposed conductors or disconnect an installed run to obtain a quote. Give each distinct assembly a simple identifier and use that identifier consistently in the photographs and equipment list. Mark any devices retained for spares, still in use or belonging to a different party. Photographs of the exterior and readable labels help connect a line item to a physical assembly. The initial submission does not require the seller to test or operate the equipment.

Plan the handoff in Denver metro

If equipment remains in a working facility, the purchase discussion must not interfere with building operations. Share the information already known, such as the location and approximate dimensions, without guessing about lift capacity or safe rigging. Electrical isolation, disconnection and rigging must be handled by qualified professionals. Covered freight applies to the agreed purchase; a quote does not imply unapproved on-site work or unrestricted access. Give the buyer enough context to distinguish a complete assembly from a partial lot: equipment type, manufacturer, available ratings, section count and photographs. Photograph readable exterior labels from a safe position and mention visible damage or missing parts. Site access and any professional removal are separate planning questions. Provide safe photographs and an authorized point of contact; further details and a collection plan can be discussed if the specific equipment is suitable for purchase.

How an offer and freight work

For a sale of 600-volt busway, owners of 600-volt equipment should identify the included assets and their authority to transfer them. Review is specific to the equipment and is not a promise that every item has a buyer. Not every model, condition or incomplete assembly is necessarily accepted. On an agreed transaction, payment is upfront and freight is covered. The seller does not need to conduct electrical testing to request a review. The available information helps distinguish the equipment offered from the rest of the property. Be clear about ownership, quantities, visible condition and any sections or devices excluded from the lot. If the buyer needs clarification, an existing record or safely accessible photo may help. There is no promise that all equipment will be accepted, and no price is represented before a specific review. For the agreed purchase, we handle and cover disconnects, crane services where needed, rigging, loading, freight and hauling. Qualified professionals perform the electrical and rigging work, so the seller does not have to arrange or perform it.

Keep electrical safety with qualified professionals

For owners of 600-volt equipment considering the sale of 600-volt busway in Denver metro, an offer does not replace site safety procedures. Never assume that a retired, unused or disconnected-looking assembly is safe to open or move. Treat installed or unidentified equipment as a matter for qualified professionals and the site's established safety procedures. Do not open cabinets, disconnect conductors or operate devices to obtain information for a buyer. All electrical work must be performed by qualified professionals; rigging and heavy movement also require appropriate expertise and an agreed plan. An inquiry is not permission to perform electrical work or bypass the facility's safety procedures. Existing maintenance information can be shared as-is and should not be presented as new test results. If the site has known access or environmental requirements, tell the buyer so qualified personnel can incorporate them into the removal plan. For an agreed purchase, we arrange qualified professionals for disconnects and rigging; the seller does not have to perform those tasks.

What to include in your inquiry

For 600-volt busway, the most helpful description connects the visible equipment to the actual seller's scope. Separate busway from unrelated material, and distinguish a complete assembly from individual components or spares. If details are uncertain, note that openly; it is better than guessing about a model, condition or rating. A buyer can then consider the inventory and discuss any agreed next steps without requiring seller testing.

LET'S GET STARTED — 06

Ready to turn
surplus into value?

Tell us a little about your equipment. Nameplate photos and the equipment's location help us get the conversation started. We buy switchgear from decommissioned data centers and shut-down power plants.

We handle all rigging and logistics. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

TEXT NAMEPLATE PHOTOS ↗

CASH OFFERS   /   UPFRONT PAYMENT   /   FREIGHT COVERED

START A CONVERSATION

Request a Quote

* Required. Maximum 10 MB total for photos. Form delivery and photo uploads are awaiting email activation; until confirmed, please text photos to (614) 715-3047 or email your request. Form submissions are processed by FormSubmit.

REQUEST A QUOTE