DENVER METRO & COLORADO FRONT RANGE
Manufacturer equipment | Buyer only

Sell Surplus Allen-Bradley Switchboards in Denver

We buy used, surplus and decommissioned electrical equipment. Cash offers, payment upfront and no seller testing. We handle rigging and logistics, including disconnects and freight.

WE BUY. WE DON'T SELL.

Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought
FULL-SERVICE DECOMMISSIONING

We buy switchgear from decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

THE VALUE IS STILL THERE — 01

Your switchgear
has value.

When equipment is surplus to your operation, finding the right buyer shouldn't add another project to your list. We buy used and decommissioned electrical distribution equipment across the Denver area, including switchgear from data centers and power plants.

Tell us what you have. We'll review the details, make a cash offer and handle all rigging and logistics: crane, rigging, disconnects, loading, freight and hauling are on us. There is no testing required from the seller.

LET'S TALK ABOUT YOUR EQUIPMENT
Real surplus electrical distribution equipment
GOOD EQUIPMENT. NEW OPPORTUNITY.DENVER, CO ↗

WHAT WE BUY — 02

Built to move
big equipment.

From a single surplus component to an entire facility changeout, send us the details. We buy equipment in all voltage classes.

06

Decommissioning projects

Electrical equipment from facilities, plants and infrastructure changeouts.

Tell us what you have

DECOMMISSIONING & CHANGEOUTS

Big projects.
One less burden.

From facility shutdowns to major electrical changeouts, we buy surplus gear and handle the work of moving it.

01 / DATA CENTERS

Data center decommissioning

We buy electrical switchgear out of decommissioned data centers. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

02 / POWER PLANTS

Power plant teardowns

We buy electrical switchgear out of shut-down power plants and handle all rigging and logistics, from disconnects and crane work to loading, freight and hauling.

Electrical disconnects and rigging are handled by qualified personnel.

A BETTER WAY TO SELL — 03

Simple from the start.

No testing on your end. No rigging or freight coordination headache. Just a straightforward conversation about your equipment.

01

Show us what you have.

Send nameplate photos, basic ratings and your location using the form, text, email or phone.

02

Get a cash offer.

We'll review your equipment and the available information to determine an offer.

03

Get paid upfront.

Once the details are agreed, payment is made upfront. Crane, rigging, disconnects, loading, freight and hauling are on us.

EQUIPMENT BUYING GUIDE — 04

Understanding the switchboard being offered

A switchboard distributes power through an assembly that may contain a main device and multiple feeder devices. When it becomes surplus, describe the complete board and its sections rather than listing every visible handle as a separate switchboard. The arrangement, device information and included accessories help distinguish a full lineup from an isolated section or a collection of unrelated breakers. Allen-Bradley is a name commonly associated with industrial controls and motor-control equipment. An inquiry may concern an assembly or individual labeled components; identify what actually carries the mark instead of assuming that an entire electrical lineup is one Allen-Bradley product.

What matters for owners of Allen-Bradley-marked equipment

A switchboard's suitability for purchase is assessed from the actual equipment, not just a building's service size. Multiple sections, incomplete documentation or a mixture of device types can change the scope of the review. Identify which parts are included and whether qualified professionals have already disconnected the assembly; never assume it can be handled like a single loose breaker. For Allen-Bradley-marked items, include the complete model or catalog designation visible on each relevant control or assembly and explain whether the equipment is part of a larger MCC lot. Do not remove units from an enclosure merely to improve a photograph; existing records can fill gaps. If the item carries this manufacturer's mark, identify the exact equipment being offered; no particular product or model is guaranteed to be accepted. Brand names identify equipment only, and the buyer claims no manufacturer affiliation. For an inquiry in Denver metro, identify the property's authorized contact, the equipment's actual location and any known access limits. An owner, facility representative and contractor can have different responsibilities; clarifying those roles makes the inventory and handoff easier to coordinate.

Identify the equipment without extra testing

For owners of Allen-Bradley-marked equipment, document the actual configuration of Allen-Bradley-marked switchboards rather than relying on a site-wide description. From an authorized safe position, take an overall exterior photograph and close-ups of accessible switchboard and main-device labels. Record voltage, ampere rating, manufacturer and model if shown, along with the approximate section count. Mention visible damage, missing covers or modifications without removing anything to inspect it. If a contractor has an existing equipment schedule, that document can supplement photographs. Give each distinct assembly a simple identifier and use that identifier consistently in the photographs and equipment list. Existing schedules, asset lists and diagrams can supplement photographs, but they may no longer reflect modifications or missing pieces. Keep existing maintenance or project records with the corresponding item, but do not create a new report or operate equipment for the inquiry. The initial submission does not require the seller to test or operate the equipment.

Plan the handoff in Denver metro

If equipment remains in a working facility, the purchase discussion must not interfere with building operations. Make clear who controls the equipment, who controls access and whether the material has already been professionally disconnected. Qualified professionals must plan and perform the appropriate electrical and physical work. On an agreed purchase, we handle preparation, loading and covered freight as well as the required disconnects and rigging. Start with the equipment type and location, a brief list of included pieces and the readable nameplate details. Add safe exterior photographs and any existing records that help identify the equipment. Describe the current status and any access constraints honestly. The buyer can then review the information, ask for clarification if needed and determine whether an offer is appropriate.

How an offer and freight work

For a sale of Allen-Bradley-marked switchboards, owners of Allen-Bradley-marked equipment should identify the included assets and their authority to transfer them. An initial description does not guarantee an offer, and an equipment label alone cannot determine a price. Not every model, condition or incomplete assembly is necessarily accepted. If the parties agree to a cash offer, payment is upfront and freight is covered. The seller does not need to conduct electrical testing to request a review. The available information helps distinguish the equipment offered from the rest of the property. Be clear about ownership, quantities, visible condition and any sections or devices excluded from the lot. If the buyer needs clarification, an existing record or safely accessible photo may help. There is no promise that all equipment will be accepted, and no price is represented before a specific review. For the agreed purchase, we handle and cover disconnects, crane services where needed, rigging, loading, freight and hauling. Qualified professionals perform the electrical and rigging work, so the seller does not have to arrange or perform it.

Keep electrical safety with qualified professionals

For owners of Allen-Bradley-marked equipment considering the sale of Allen-Bradley-marked switchboards in Denver metro, an offer does not replace site safety procedures. Electrical equipment can contain dangerous energy even when its operating status is uncertain. Take photographs only from an authorized safe position, and use existing records when a label is inaccessible. Do not open cabinets, disconnect conductors or operate devices to obtain information for a buyer. All electrical work must be done by qualified professionals, and moving large or unstable equipment requires appropriately qualified handling personnel. An inquiry is not permission to perform electrical work or bypass the facility's safety procedures. Existing maintenance information can be shared as-is and should not be presented as new test results. If the site has known access or environmental requirements, tell the buyer so qualified personnel can incorporate them into the removal plan. For an agreed purchase, we arrange qualified professionals for disconnects and rigging; the seller does not have to perform those tasks.

What to include in your inquiry

For Allen-Bradley-marked switchboards, the most helpful description connects the visible equipment to the actual seller's scope. Separate switchboards from unrelated material, and distinguish a complete assembly from individual components or spares. If details are uncertain, note that openly; it is better than guessing about a model, condition or rating. A buyer can then consider the inventory and discuss any agreed next steps without requiring seller testing.

LET'S GET STARTED — 06

Ready to turn
surplus into value?

Tell us a little about your equipment. Nameplate photos and the equipment's location help us get the conversation started. We buy switchgear from decommissioned data centers and shut-down power plants.

We handle all rigging and logistics. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

TEXT NAMEPLATE PHOTOS ↗

CASH OFFERS   /   UPFRONT PAYMENT   /   FREIGHT COVERED

START A CONVERSATION

Request a Quote

* Required. Maximum 10 MB total for photos. Form delivery and photo uploads are awaiting email activation; until confirmed, please text photos to (614) 715-3047 or email your request. Form submissions are processed by FormSubmit.

REQUEST A QUOTE