DENVER METRO & COLORADO FRONT RANGE
Manufacturer equipment | Buyer only

Sell Surplus Federal Pacific Panelboards in Denver

We buy used, surplus and decommissioned electrical equipment. Cash offers, payment upfront and no seller testing. We handle rigging and logistics, including disconnects and freight.

WE BUY. WE DON'T SELL.

Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought
FULL-SERVICE DECOMMISSIONING

We buy switchgear from decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

THE VALUE IS STILL THERE — 01

Your switchgear
has value.

When equipment is surplus to your operation, finding the right buyer shouldn't add another project to your list. We buy used and decommissioned electrical distribution equipment across the Denver area, including switchgear from data centers and power plants.

Tell us what you have. We'll review the details, make a cash offer and handle all rigging and logistics: crane, rigging, disconnects, loading, freight and hauling are on us. There is no testing required from the seller.

LET'S TALK ABOUT YOUR EQUIPMENT
Real surplus electrical distribution equipment
GOOD EQUIPMENT. NEW OPPORTUNITY.DENVER, CO ↗

WHAT WE BUY — 02

Built to move
big equipment.

From a single surplus component to an entire facility changeout, send us the details. We buy equipment in all voltage classes.

06

Decommissioning projects

Electrical equipment from facilities, plants and infrastructure changeouts.

Tell us what you have

DECOMMISSIONING & CHANGEOUTS

Big projects.
One less burden.

From facility shutdowns to major electrical changeouts, we buy surplus gear and handle the work of moving it.

01 / DATA CENTERS

Data center decommissioning

We buy electrical switchgear out of decommissioned data centers. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

02 / POWER PLANTS

Power plant teardowns

We buy electrical switchgear out of shut-down power plants and handle all rigging and logistics, from disconnects and crane work to loading, freight and hauling.

Electrical disconnects and rigging are handled by qualified personnel.

A BETTER WAY TO SELL — 03

Simple from the start.

No testing on your end. No rigging or freight coordination headache. Just a straightforward conversation about your equipment.

01

Show us what you have.

Send nameplate photos, basic ratings and your location using the form, text, email or phone.

02

Get a cash offer.

We'll review your equipment and the available information to determine an offer.

03

Get paid upfront.

Once the details are agreed, payment is made upfront. Crane, rigging, disconnects, loading, freight and hauling are on us.

EQUIPMENT BUYING GUIDE — 04

Understanding the panelboard being offered

Panelboards distribute power to branch circuits and can vary in enclosure size, rating, configuration and included protective devices. A surplus panelboard is not automatically equivalent to a single circuit breaker or a large distribution switchboard. Describe the assembly being offered, whether its cabinet and devices are included, and whether it is a standalone item or part of a larger equipment lot. Federal Pacific is a name that may appear on older electrical distribution equipment. A brand label alone does not establish the exact model, condition or safety of a particular unit. Avoid assumptions based on appearance and identify the equipment using the full visible nameplate information.

What matters for owners of Federal Pacific-marked equipment

An evaluation considers the actual panelboard, its completeness, condition and identifying information. A mixed group of panels can contain different series and ratings, so note differences rather than treating them as identical. Tell the buyer whether qualified personnel have already disconnected them and whether the cabinets are accessible for collection. Submission of a photograph does not mean that a particular panel will be accepted. For Federal Pacific-marked inventory, record the specific series, ratings and visible physical condition when accessible. Do not operate a breaker or open an enclosure to obtain information. Any safety assessment or electrical work belongs to qualified professionals, and a purchase is subject to review rather than a blanket acceptance promise. If the item carries this manufacturer's mark, identify the exact equipment being offered; no particular product or model is guaranteed to be accepted. Brand names identify equipment only, and the buyer claims no manufacturer affiliation. For an inquiry in Denver metro, identify the property's authorized contact, the equipment's actual location and any known access limits. An owner, facility representative and contractor can have different responsibilities; clarifying those roles makes the inventory and handoff easier to coordinate.

Identify the equipment without extra testing

For owners of Federal Pacific-marked equipment, document the actual configuration of Federal Pacific-marked panelboards rather than relying on a site-wide description. Provide exterior photographs and any accessible manufacturer and rating labels, plus a description of visible devices and the approximate enclosure size. Manufacturer, series, voltage and ampere information can help distinguish otherwise similar panels. Existing schedules are useful if available, but the seller does not have to energize the panel, remove a cover or test a breaker to ask for an evaluation. If the available documentation is incomplete, say which facts are confirmed and which are estimates. Show each distinct type, estimate quantities and explain whether the pieces are complete or accompanied by loose components. If the nameplate cannot be read from a safe position, do not reach into the equipment or remove a barrier; describe the gap. A qualified party can determine whether further information can be obtained safely.

Plan the handoff in Denver metro

A large assembly may require a different collection plan from a small pallet of devices. Mark which assets are available and which are excluded, and share known access or security requirements. Any electrical disconnection and heavy movement must be handled by qualified professionals. We handle the disconnects, rigging, loading and freight for the agreed purchase, so the seller does not have to arrange them. Give the buyer enough context to distinguish a complete assembly from a partial lot: equipment type, manufacturer, available ratings, section count and photographs. Photograph readable exterior labels from a safe position and mention visible damage or missing parts. Explain whether it is installed or in storage, who is authorized to sell it and any known access constraints. The buyer can assess the specific items without asking the seller to create test results.

How an offer and freight work

For a sale of Federal Pacific-marked panelboards, owners of Federal Pacific-marked equipment should identify the included assets and their authority to transfer them. An initial description does not guarantee an offer, and an equipment label alone cannot determine a price. A cash offer is subject to the actual equipment and review. If the parties agree to a cash offer, payment is upfront and freight is covered. No test by the seller is required for the inquiry; tell the buyer what is known and disclose what cannot be confirmed from existing information. The available information helps distinguish the equipment offered from the rest of the property. Be clear about ownership, quantities, visible condition and any sections or devices excluded from the lot. If the buyer needs clarification, an existing record or safely accessible photo may help. There is no promise that all equipment will be accepted, and no price is represented before a specific review. For the agreed purchase, we handle and cover disconnects, crane services where needed, rigging, loading, freight and hauling. Qualified professionals perform the electrical and rigging work, so the seller does not have to arrange or perform it.

Keep electrical safety with qualified professionals

For owners of Federal Pacific-marked equipment considering the sale of Federal Pacific-marked panelboards in Denver metro, an offer does not replace site safety procedures. The line between documenting equipment and working on it matters. Take photographs only from an authorized safe position, and use existing records when a label is inaccessible. Do not remove barriers, operate devices or attempt electrical disconnection. All electrical work must be performed by qualified professionals; rigging and heavy movement also require appropriate expertise and an agreed plan. An inquiry is not permission to perform electrical work or bypass the facility's safety procedures. Existing maintenance information can be shared as-is and should not be presented as new test results. If the site has known access or environmental requirements, tell the buyer so qualified personnel can incorporate them into the removal plan. For an agreed purchase, we arrange qualified professionals for disconnects and rigging; the seller does not have to perform those tasks.

What to include in your inquiry

For Federal Pacific-marked panelboards, the most helpful description connects the visible equipment to the actual seller's scope. Separate panelboards from unrelated material, and distinguish a complete assembly from individual components or spares. If details are uncertain, note that openly; it is better than guessing about a model, condition or rating. A buyer can then consider the inventory and discuss any agreed next steps without requiring seller testing.

LET'S GET STARTED — 06

Ready to turn
surplus into value?

Tell us a little about your equipment. Nameplate photos and the equipment's location help us get the conversation started. We buy switchgear from decommissioned data centers and shut-down power plants.

We handle all rigging and logistics. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

TEXT NAMEPLATE PHOTOS ↗

CASH OFFERS   /   UPFRONT PAYMENT   /   FREIGHT COVERED

START A CONVERSATION

Request a Quote

* Required. Maximum 10 MB total for photos. Form delivery and photo uploads are awaiting email activation; until confirmed, please text photos to (614) 715-3047 or email your request. Form submissions are processed by FormSubmit.

REQUEST A QUOTE