DENVER METRO & COLORADO FRONT RANGE
Seller questions and situations | Buyer only

Sell Multiple Electrical Equipment Lineups

We buy used, surplus and decommissioned electrical equipment. Cash offers, payment upfront and no seller testing. We handle rigging and logistics, including disconnects and freight.

WE BUY. WE DON'T SELL.

Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought
FULL-SERVICE DECOMMISSIONING

We buy switchgear from decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

THE VALUE IS STILL THERE — 01

Your switchgear
has value.

When equipment is surplus to your operation, finding the right buyer shouldn't add another project to your list. We buy used and decommissioned electrical distribution equipment across the Denver area, including switchgear from data centers and power plants.

Tell us what you have. We'll review the details, make a cash offer and handle all rigging and logistics: crane, rigging, disconnects, loading, freight and hauling are on us. There is no testing required from the seller.

LET'S TALK ABOUT YOUR EQUIPMENT
Real surplus electrical distribution equipment
GOOD EQUIPMENT. NEW OPPORTUNITY.DENVER, CO ↗

WHAT WE BUY — 02

Built to move
big equipment.

From a single surplus component to an entire facility changeout, send us the details. We buy equipment in all voltage classes.

06

Decommissioning projects

Electrical equipment from facilities, plants and infrastructure changeouts.

Tell us what you have

DECOMMISSIONING & CHANGEOUTS

Big projects.
One less burden.

From facility shutdowns to major electrical changeouts, we buy surplus gear and handle the work of moving it.

01 / DATA CENTERS

Data center decommissioning

We buy electrical switchgear out of decommissioned data centers. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

02 / POWER PLANTS

Power plant teardowns

We buy electrical switchgear out of shut-down power plants and handle all rigging and logistics, from disconnects and crane work to loading, freight and hauling.

Electrical disconnects and rigging are handled by qualified personnel.

A BETTER WAY TO SELL — 03

Simple from the start.

No testing on your end. No rigging or freight coordination headache. Just a straightforward conversation about your equipment.

01

Show us what you have.

Send nameplate photos, basic ratings and your location using the form, text, email or phone.

02

Get a cash offer.

We'll review your equipment and the available information to determine an offer.

03

Get paid upfront.

Once the details are agreed, payment is made upfront. Crane, rigging, disconnects, loading, freight and hauling are on us.

EQUIPMENT BUYING GUIDE — 04

Understanding the electrical equipment being offered

Surplus electrical equipment can be a complete distribution lineup, an individual protective device, a motor-control section or a collection of parts left after an upgrade. Those items are not interchangeable simply because they came from the same electrical room. A useful inventory separates complete assemblies from loose components and records what is actually included, so a buyer can understand the practical scope before discussing an offer. Several lineups at one property should be identified individually by equipment tag, model or location. A single approximate rating for the property will not tell a buyer which sections and devices are included in the proposed sale.

What matters for multi-lineup sellers

Completeness, physical condition, configuration and the ability to identify the equipment all matter. Explain whether an item is still installed, already disconnected by qualified professionals, stored indoors or prepared for collection. Do not assume that age alone establishes value or that every item in a mixed lot will be suitable; a review is necessary before a cash offer can be made. Organize photographs and existing schedules by lineup, and say whether the equipment is offered together or as separate groups. Different configurations and conditions can lead to different review outcomes; no single offer is assumed. For an inquiry in Denver metro, identify the property's authorized contact, the equipment's actual location and any known access limits. An owner, facility representative and contractor can have different responsibilities; clarifying those roles makes the inventory and handoff easier to coordinate.

Identify the equipment without extra testing

For multi-lineup sellers, document the actual configuration of electrical equipment rather than relying on a site-wide description. Start with exterior photographs of each distinct assembly and any legible manufacturer's labels. Record the equipment type, manufacturer, model or catalog number, voltage and ampere rating when visible. A single wide image can show scale, while separate images can show labels and included devices. If a label is obscured, describe the limitation rather than asking someone to open an energized enclosure or perform a test. Where a lot contains more than one model, avoid treating a single nameplate as representative of every item. Mark any devices retained for spares, still in use or belonging to a different party. Note visible damage without making claims about unseen internal condition. The initial submission does not require the seller to test or operate the equipment.

Plan the handoff in Denver metro

The condition of the route from the equipment to a collection point matters, particularly for a long lineup or oversized enclosure. Mark which assets are available and which are excluded, and share known access or security requirements. Any isolation, removal or rigging must be carried out by qualified professionals under the site's procedures. The buyer covers freight under an agreed purchase, with the handoff details coordinated in advance. Bring together the available photographs, the nameplate details and any existing equipment schedule before describing the intended sale. Provide the location, manufacturer, model and ratings when visible, together with a count and safe exterior images. Explain whether it is installed or in storage, who is authorized to sell it and any known access constraints. If information is missing, say so; an initial inquiry can still establish whether the buyer needs clarification or can consider a cash offer.

How an offer and freight work

For a sale of electrical equipment, multi-lineup sellers should identify the included assets and their authority to transfer them. This is a buyer-only service: the purpose of the conversation is to evaluate surplus equipment for purchase, not to sell the owner replacement gear. Not every model, condition or incomplete assembly is necessarily accepted. Where an offer is made and agreed, payment is upfront and freight is covered. Questions about preparing the site, professional removal or loading should be resolved explicitly rather than assumed. The available information helps distinguish the equipment offered from the rest of the property. Be clear about ownership, quantities, visible condition and any sections or devices excluded from the lot. If the buyer needs clarification, an existing record or safely accessible photo may help. There is no promise that all equipment will be accepted, and no price is represented before a specific review. For the agreed purchase, we handle and cover disconnects, crane services where needed, rigging, loading, freight and hauling. Qualified professionals perform the electrical and rigging work, so the seller does not have to arrange or perform it.

Keep electrical safety with qualified professionals

For multi-lineup sellers considering the sale of electrical equipment in Denver metro, an offer does not replace site safety procedures. Site personnel should not take electrical risks to complete an inventory. Take photographs only from an authorized safe position, and use existing records when a label is inaccessible. Avoid touching exposed electrical parts, operating equipment or removing covers. All electrical work and any necessary rigging or heavy handling must be performed by qualified professionals; the seller is not required to test equipment. An inquiry is not permission to perform electrical work or bypass the facility's safety procedures. Existing maintenance information can be shared as-is and should not be presented as new test results. If the site has known access or environmental requirements, tell the buyer so qualified personnel can incorporate them into the removal plan. For an agreed purchase, we arrange qualified professionals for disconnects and rigging; the seller does not have to perform those tasks.

What to include in your inquiry

For electrical equipment, the most helpful description connects the visible equipment to the actual seller's scope. Separate electrical equipment from unrelated material, and distinguish a complete assembly from individual components or spares. If details are uncertain, note that openly; it is better than guessing about a model, condition or rating. A buyer can then consider the inventory and discuss any agreed next steps without requiring seller testing.

LET'S GET STARTED — 06

Ready to turn
surplus into value?

Tell us a little about your equipment. Nameplate photos and the equipment's location help us get the conversation started. We buy switchgear from decommissioned data centers and shut-down power plants.

We handle all rigging and logistics. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

TEXT NAMEPLATE PHOTOS ↗

CASH OFFERS   /   UPFRONT PAYMENT   /   FREIGHT COVERED

START A CONVERSATION

Request a Quote

* Required. Maximum 10 MB total for photos. Form delivery and photo uploads are awaiting email activation; until confirmed, please text photos to (614) 715-3047 or email your request. Form submissions are processed by FormSubmit.

REQUEST A QUOTE