DENVER METRO & COLORADO FRONT RANGE
Seller questions and situations | Buyer only

Sell Large Switchgear Lineups With Freight Covered

We buy used, surplus and decommissioned electrical equipment. Cash offers, payment upfront and no seller testing. We handle rigging and logistics, including disconnects and freight.

WE BUY. WE DON'T SELL.

Payments Upfront
No Testing
We Cover All Freight
All Voltage Classes Bought
FULL-SERVICE DECOMMISSIONING

We buy switchgear from decommissioned data centers and shut-down power plants. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

THE VALUE IS STILL THERE — 01

Your switchgear
has value.

When equipment is surplus to your operation, finding the right buyer shouldn't add another project to your list. We buy used and decommissioned electrical distribution equipment across the Denver area, including switchgear from data centers and power plants.

Tell us what you have. We'll review the details, make a cash offer and handle all rigging and logistics: crane, rigging, disconnects, loading, freight and hauling are on us. There is no testing required from the seller.

LET'S TALK ABOUT YOUR EQUIPMENT
Real surplus electrical distribution equipment
GOOD EQUIPMENT. NEW OPPORTUNITY.DENVER, CO ↗

WHAT WE BUY — 02

Built to move
big equipment.

From a single surplus component to an entire facility changeout, send us the details. We buy equipment in all voltage classes.

06

Decommissioning projects

Electrical equipment from facilities, plants and infrastructure changeouts.

Tell us what you have

DECOMMISSIONING & CHANGEOUTS

Big projects.
One less burden.

From facility shutdowns to major electrical changeouts, we buy surplus gear and handle the work of moving it.

01 / DATA CENTERS

Data center decommissioning

We buy electrical switchgear out of decommissioned data centers. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

02 / POWER PLANTS

Power plant teardowns

We buy electrical switchgear out of shut-down power plants and handle all rigging and logistics, from disconnects and crane work to loading, freight and hauling.

Electrical disconnects and rigging are handled by qualified personnel.

A BETTER WAY TO SELL — 03

Simple from the start.

No testing on your end. No rigging or freight coordination headache. Just a straightforward conversation about your equipment.

01

Show us what you have.

Send nameplate photos, basic ratings and your location using the form, text, email or phone.

02

Get a cash offer.

We'll review your equipment and the available information to determine an offer.

03

Get paid upfront.

Once the details are agreed, payment is made upfront. Crane, rigging, disconnects, loading, freight and hauling are on us.

EQUIPMENT BUYING GUIDE — 04

Understanding the switchgear being offered

Switchgear brings protective and switching devices together in an assembly used to control electrical distribution. A surplus lineup may include several connected sections, removable or fixed devices, controls and related equipment; the visible outside does not by itself establish what is inside. Identify the whole lineup as well as the individual sections so that a review does not confuse one breaker with the complete assembly. Large lineups can involve multiple sections, heavy handling and constrained access. Provide approximate overall dimensions, section counts and a description of the route or staging area if already known; do not represent estimates as certified measurements.

What matters for owners of large lineups

For a switchgear lineup, configuration and completeness can be as important as the headline rating. A section that has been separated from its companions is different from an intact lineup, and missing devices or damaged enclosures should be disclosed. A review also depends on whether the equipment can be identified and transferred safely, so an inquiry is not a promise that any particular lineup will be purchased. For an agreed purchase, we handle qualified electrical disconnects, crane services where needed, rigging, loading, freight and hauling. The seller does not have to do or arrange the removal work. Site access and equipment details inform the safe handoff plan. For an inquiry in Denver metro, identify the property's authorized contact, the equipment's actual location and any known access limits. An owner, facility representative and contractor can have different responsibilities; clarifying those roles makes the inventory and handoff easier to coordinate.

Identify the equipment without extra testing

For owners of large lineups, document the actual configuration of switchgear rather than relying on a site-wide description. Photograph the overall front and any safely accessible exterior nameplates, then identify the manufacturer, series, voltage, continuous current and device catalog information if legible. Note the number of sections and whether doors, breakers, controls and other visible pieces are included. Pictures from a safe authorized position are enough for an initial conversation; there is no need to open compartments or operate equipment for the buyer. Where a lot contains more than one model, avoid treating a single nameplate as representative of every item. Mark any devices retained for spares, still in use or belonging to a different party. If the nameplate cannot be read from a safe position, do not reach into the equipment or remove a barrier; describe the gap. The buyer can use the actual evidence provided to decide whether more detail is needed or an offer is appropriate.

Plan the handoff in Denver metro

The condition of the route from the equipment to a collection point matters, particularly for a long lineup or oversized enclosure. Mark which assets are available and which are excluded, and share known access or security requirements. Any isolation, removal or rigging must be carried out by qualified professionals under the site's procedures. On an agreed purchase, we handle preparation, loading and covered freight as well as the required disconnects and rigging. Start with the equipment type and location, a brief list of included pieces and the readable nameplate details. Add safe exterior photographs and any existing records that help identify the equipment. Describe the current status and any access constraints honestly. The buyer can then review the information, ask for clarification if needed and determine whether an offer is appropriate.

How an offer and freight work

For a sale of switchgear, owners of large lineups should identify the included assets and their authority to transfer them. This is a buyer-only service: the purpose of the conversation is to evaluate surplus equipment for purchase, not to sell the owner replacement gear. A cash offer is subject to the actual equipment and review. If the seller accepts the agreed terms, payment is upfront and freight is covered. Questions about preparing the site, professional removal or loading should be resolved explicitly rather than assumed. The available information helps distinguish the equipment offered from the rest of the property. Be clear about ownership, quantities, visible condition and any sections or devices excluded from the lot. If the buyer needs clarification, an existing record or safely accessible photo may help. There is no promise that all equipment will be accepted, and no price is represented before a specific review. For the agreed purchase, we handle and cover disconnects, crane services where needed, rigging, loading, freight and hauling. Qualified professionals perform the electrical and rigging work, so the seller does not have to arrange or perform it.

Keep electrical safety with qualified professionals

For owners of large lineups considering the sale of switchgear in Denver metro, an offer does not replace site safety procedures. The line between documenting equipment and working on it matters. Take photographs only from an authorized safe position, and use existing records when a label is inaccessible. Do not remove barriers, operate devices or attempt electrical disconnection. All electrical work and any necessary rigging or heavy handling must be performed by qualified professionals; the seller is not required to test equipment. An inquiry is not permission to perform electrical work or bypass the facility's safety procedures. Existing maintenance information can be shared as-is and should not be presented as new test results. If the site has known access or environmental requirements, tell the buyer so qualified personnel can incorporate them into the removal plan. For an agreed purchase, we arrange qualified professionals for disconnects and rigging; the seller does not have to perform those tasks.

What to include in your inquiry

For switchgear, the most helpful description connects the visible equipment to the actual seller's scope. Separate switchgear from unrelated material, and distinguish a complete assembly from individual components or spares. If details are uncertain, note that openly; it is better than guessing about a model, condition or rating. A buyer can then consider the inventory and discuss any agreed next steps without requiring seller testing.

LET'S GET STARTED — 06

Ready to turn
surplus into value?

Tell us a little about your equipment. Nameplate photos and the equipment's location help us get the conversation started. We buy switchgear from decommissioned data centers and shut-down power plants.

We handle all rigging and logistics. Crane, rigging, disconnects, loading, freight and hauling are on us. The seller does nothing but get paid.

TEXT NAMEPLATE PHOTOS ↗

CASH OFFERS   /   UPFRONT PAYMENT   /   FREIGHT COVERED

START A CONVERSATION

Request a Quote

* Required. Maximum 10 MB total for photos. Form delivery and photo uploads are awaiting email activation; until confirmed, please text photos to (614) 715-3047 or email your request. Form submissions are processed by FormSubmit.

REQUEST A QUOTE